Archives

Bathroom cleaning tip #2

We plumbers wash our hands 10 or more times a day.

The Coronavirus pandemic is making us all think about the transmission of germs and how the virus is transmitted on the surfaces we come in contact with.
On any visit to work in your bathroom we could touch the hot and cold taps in your bath, shower or handbasin and the cold water tap to your toilet.

The tap supplying water to the toilet isn’t touched regularly, so, it has a reduced chance of transmission through touch.
But, it is near the toilet so airborne germs are a concern.

The simple task of using the toilet and then wiping ourselves is something we all learned as kids, but, in researching this article I’m surprised to learn the number of different methods people use.
No matter how you do it, the first thing we all do is flush the toilet.

Before we wash our hands!

Alarm bells are ringing for you right now. As they should be!
But(t), let’s be practical.

Whether you have a plumber working in your bathroom or not, keep an atomiser spray bottle with a mix of water and disinfectant with an appropriate cleaning cloth in your bathroom.
Spray the toilet flush button, the cistern lid, the toilet seat and lid and wipe them over thoroughly.
And if you’re keen to clean the entire bathroom, click here to see another of our easy cleaning tips

 

How is water connected to my toilet cistern?

Many modern toilets have a concealed cistern.
That’s the tank that holds the water that flushes the loo.
Now they do look fantastic and they do save water.
The small dual flush buttons are the access panel for the internal workings of the cistern.
When they need maintenance, the only way to repair them is through that access panel.

The water tap is usually built into the wall and this one couldn’t be replaced without cutting into the wall behind.

How much will it cost to fix my toilet?

Running toilet quote…..Is all an email said earlier this week, with the attached picture.

It’s hard to say from this picture I said, but I tried to help the writer by asking a few simple questions
Is it a close coupled suite?
Or are the pan and cistern separate?
Is it the inlet or outlet valve leaking?
Does the water turn off at the control valve?
Is the connection between the control valve and the cistern hard drawn tube or is it one of those flexible braided connections?
The outlet valve is redundant. It could be rewashered if that’s the problem, was part of my email response

The flushing toilet is a wonder of the modern world we can take for granted considering our previous post about 4.4 billion people not having a toilet.
But
Our local bathroom suppliers currently have 48 different types of toilet cisterns on display and that’s not including the antique in our picture.
They all have different water connections and flushing mechanisms.
So please, help us help you by providing as much information as possible about your particular leaking toilet.
In the meantime, you can turn off the water and flush your loo with a bucket.

My toilet cistern is leaking #1

“My cistern is leaking into the toilet pan”
If you press the Full and Half flush buttons and they don’t effectively clear the toilet bowl,
That is, their isn’t enough water in the toilet cistern to do the job
or
The buttons just don’t work
or
the cistern just won’t refill or it’s slow to fill
Then
I know how to fix the toilet that won’t flush properly.
This pic shows the water inlet to the cistern and the outlet valve or flushing mechanism that sends the water into your toilet pan.

Either of the valves shown could be faulty.
If the inlet valve doesn’t shut-off, it will cause the cistern to overfill and spill into the overflow tube that will run down into the pan.
You may need a new inlet valve.
If the outlet valve is leaking into the pan, the outlet valve may need to be replaced or re-washered.
Either of these valves leaking could be causing leaks into the pan.

If you’re not sure, just ask us.

Toilet won’t flush properly #1

“My toilet won’t flush properly” is a common cry for help in our emergency plumbing business.
We then ask, Do you mean the dirty water won’t flush away?
If the answer is yes and it looks like this,
then you have a blocked drain and you need a blocked drain expert quickly

However, if you press the Full and Half flush buttons and they don’t effectively clear the toilet bowl,
That is, their isn’t enough water in the toilet cistern to do the job
or
The buttons just don’t work
or
the cistern just won’t refill or it’s slow to fill
Then
I know how to fix the toilet that won’t flush properly.

Spend a penny on a hot day

It’s hot in Sydney today. 30 deg C.    With the forecast to be 38 C. tomorrow Wednesday.

It’s uncomfortable!

We did all of our plumbing jobs earlier today, before it got too hot.
Interestingly, the average Sydney bathroom is a cool place to be on a hot day.
The tiled floor and walls in the bathroom made it significantly cooler.
So, if you can, stay in the bathroom a little longer today. Sit a little longer and read this story of the landlord who put a coin operated flush button on his tenants WC cistern in an effort to “save water”.
Now stay cooler longer and read about it here.

Funny, 10 days ago I was in Sheridan Montana and the temp was -29 C. I’m glad their bathroom was heated.