Archives
Problems with hot water during the long hot summer?
Welcome to 2010!
Over the Christmas and New Year period we were called to rescue people with all sorts of plumbing emergencies!
Burst water pipes, blocked sewer drains, leaking taps and toilets are commonplace, but, here at the height of summer, calls for help for running hot water is at an all time high!
Ruptured water heaters or burst water heaters happen all the time and we only think of it as a problem in the winter, but we love a warm shower in the summer just as much.
Try telling a family that we can’t replace their particular type of heater over the holidays, because…………..ahhhhhhhh!
So here are a few simple tips that will assist:
1. Know where your water heater is. You would be surprised how many people don’t know where their water heater is!
2. Know how to turn your water heater off.
3. Try turning your water heater off to check that the cold water valve that turns it off works. One emergency water heater job we went to on Boxing Day, could have saved the owner money if they could have simply turned their heater off at the control valve or tap. The tap would not work, so we had to shut down the entire house, cut out the faulty tap valve and fit a new valve. We then turned the water to the house back on, so our clients at least had cold water to flush the toilet, make a cuppa and have a cold shower until we could track down the appropriate new water heater that was needed.
4. Pull the pressure relief valve on your mains pressure water heater, let it run for 5 or 10 seconds. When you let the valve go the water should slow down and then stop. If it does not stop, try it again. The pressure relief valve should be eased at least every 6 months.
5. Make sure its dry and clean around the base of your water heater storage area. Keep it clear of leaf debris, and long grass if it is outside.
6. Don’t store flammable liquids, petrol or paint anywhere near a gas water heater.
https://www.thelonedrainerandpronto.com.au/hot-water-services.html